GET VALID CISCO 300-610 EXAM QUESTIONS AND ANSWER

Get Valid Cisco 300-610 Exam Questions and Answer

Get Valid Cisco 300-610 Exam Questions and Answer

Blog Article

Tags: Latest 300-610 Practice Materials, New 300-610 Test Tutorial, Exam 300-610 Questions, 300-610 New Braindumps Free, 300-610 Latest Version

2025 Latest 2Pass4sure 300-610 PDF Dumps and 300-610 Exam Engine Free Share: https://drive.google.com/open?id=1NAqkyxOfYfdJ_XtGwpiWWD-LKRdIJSyD

All time and energy you devoted to the 300-610 preparation quiz is worthwhile. With passing rate up to 98 percent and above, our 300-610 practice materials are highly recommended among exam candidates. So their validity and authority are unquestionable. Our 300-610 Learning Materials are just staring points for exam candidates, and you may meet several challenging tasks or exams in the future about computer knowledge, we can still offer help. Need any help, please contact with us again!

Cisco 300-610: Designing Cisco Data Center Infrastructure Exam is an ideal certification exam for professionals who design and implement data center infrastructure solutions. 300-610 exam validates the candidates' knowledge and skills in designing and implementing data center infrastructure solutions using Cisco solutions. 300-610 exam is available in English and Japanese languages and can be taken at any Pearson VUE testing center worldwide.

To pass the Cisco 300-610 certification exam, candidates need to have a deep understanding of data center infrastructure design principles and Cisco technologies. They should be able to plan and design highly available and resilient data center architectures to meet business requirements. Candidates should also have a good grasp of storage networking technologies, including Fibre Channel, FCoE, and iSCSI, and compute technologies, such as UCS and server virtualization. Additionally, candidates should have knowledge of automation technologies, such as Ansible and Python, to automate data center infrastructure tasks. Passing the Cisco 300-610 Certification Exam confirms that candidates have a strong foundation in data center infrastructure design and implementation using Cisco technologies, and are capable of delivering reliable and efficient solutions to their organizations.

>> Latest 300-610 Practice Materials <<

300-610 Questions & Answers & 300-610 Study Guide & 300-610 Exam Preparation

We have a large number of regular customers exceedingly trust our Designing Cisco Data Center Infrastructure practice materials for their precise content about the exam. You may previously have thought preparing for the 300-610 practice exam will be full of agony, actually, you can abandon the time-consuming thought from now on. Our practice materials can be understood with precise content for your information, which will remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our 300-610 practice materials. Up to now, more than 98 percent of buyers of our practice materials have passed it successfully. 300-610 practice materials can be classified into three versions: the pdf, the software and the app version. So we give emphasis on your goals, and higher quality of our 300-610 practice materials.

Passing the Cisco 300-610 Exam requires a deep understanding of data center infrastructure design principles and the ability to apply these principles to real-world situations. Candidates must also have a thorough understanding of Cisco data center technologies and solutions, including Cisco ACI, Cisco UCS, and Cisco Nexus switches. Additionally, candidates must be familiar with automation tools and techniques, as well as security best practices for data center infrastructure.

Cisco Designing Cisco Data Center Infrastructure Sample Questions (Q104-Q109):

NEW QUESTION # 104
Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

  • A. 9000 bytes
  • B. 2000 bytes
  • C. 2240 bytes
  • D. 2158 bytes

Answer: D

Explanation:
This policy map shows a wrong MTU config. Check "12. Do I need to enable Jumbo frames for FCOE?" in https://community.cisco.com/t5/data-center-documents/fibre-channel-over-ethernet-fcoe-questions-and-answers-from-live/ta-p/3108755
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/qos/521_n1_1/b_5k_QoS_Config_521N11/b_5k_QoS_Config_521N11_chapter_0110.html


NEW QUESTION # 105
You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

  • A. VTEP
  • B. a map resolver
  • C. the site identifier
  • D. a map server
  • E. VNI

Answer: B,D

Explanation:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s- book/irl-cfg-lisp.html


NEW QUESTION # 106
An ACI deployment must:
- Only use a proxy for border leaf switches.
- Classify incoming traffic on L3OUT.
- Immediately update the endpoint database when the endpoint moves
between leaf switches.
Which VRF configuration must be used?

  • A. Enforce Subnet Check enabled
    IP Dataplane Learning enabled
    Egress Policy Control enforcement
  • B. Enforce Subnet Check disabled
    IP Dataplane Learning disabled
    Ingress Policy Control enforcement
  • C. Ingress Policy Control enforcement
    Egress Policy Control enforcement
    IP Dataplane Learning enabled
  • D. Ingress Policy Control enforcement
    Enforce Subnet Check enabled
    IP Dataplane Learning disabled

Answer: C


NEW QUESTION # 107
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

  • A. Embedded RP
  • B. MSDP
  • C. Phantom RP
  • D. PIM anycast RP

Answer: C

Explanation:
Check the Phantom RP section in:
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip- multicast/whitepaper_c11-508498.html
https://www.cisco.com/c/dam/en/us/products/collateral/ios-nx-os-software/multicast- enterprise/prod_white_paper0900aecd80310db2.pdf Because multicast source information is no longer available in Bidir, the Anycast/MSDP mechanism used to provide redundancy in sparse-mode is not an option for Bidir.


NEW QUESTION # 108
Refer to the exhibit.

Refer to the exhibit. A Cisco engineer is planning a data migration job in heterogeneous SANs where the existing and new storage devices for the migration are already connected to the MDS switches. All paths from the SSM to the storage-connected switch are going through the Cisco fabric. The setup is with active/active arrays and multiple LUN sets. What is the best approach to copy the LUN sets to the new location?

  • A. Create two data migration jobs, and add two storage pons in each job.
  • B. Add all paths Fabric-A zones to Fabric-B zones.
  • C. Enable synchronous replication for the new storage array.
  • D. Grant access to all servers to the existing data sets.

Answer: A


NEW QUESTION # 109
......

New 300-610 Test Tutorial: https://www.2pass4sure.com/CCNP-Data-Center/300-610-actual-exam-braindumps.html

2025 Latest 2Pass4sure 300-610 PDF Dumps and 300-610 Exam Engine Free Share: https://drive.google.com/open?id=1NAqkyxOfYfdJ_XtGwpiWWD-LKRdIJSyD

Report this page